Specification
Specifications
| Model name | FCX2000-60VC | FCX2000-120VC | FCX2000-180VC | FCX2000-120ES (*1) |
|
|---|---|---|---|---|---|
| Configuration | Digital servo system, Flatbed | ||||
| Media hold-down method | Vacuum suction | Electrostatic | |||
| Effective cutting area | 610mm x 920mm | 1200mm x 920mm | 1800mm x 920mm | 1200mm x 920mm | |
| Mountable media (Y-axis) | 950mm (37.4 inch) | ||||
| Roll media support | Roll media stocker (manual feeding), supported media; width: up to 950 mm, weight: up to 5 kg | ||||
| Maximum cutting speed | 400 mm/s (1 to 40 cm/s in 16 steps), in all directions | ||||
| Cutting force | Tool 1: Max. 4.9 N (500 gf), Tool 2: Max. 9.8 N (1 kgf) | ||||
| Cutting force settings | Tool 1: in 40 steps, Tool 2: in 40 steps | ||||
| Minimum character height | Approx. 3 mm square (Approx. 0.12 inch) (varies with character font and media) (*2) | ||||
| Programmable resolution | GP-GL mode: 0.1/0.05/0.025/0.01 mm, HP-GL™ : 0.025 mm | ||||
| Distance accuracy | Max. 0.1% of the distance moved or 0.1 mm, whichever is larger (value after distance correction / excluding contraction of media, in plotting/cutting mode) (*2) |
||||
| Perpendicularity | Max 0.5 mm / 900 mm (excluding contraction of media, in plotting/cutting mode) | ||||
| Repeatability | Max 0.1 mm (excluding contraction of media, in plotting/cutting mode) (*2) | ||||
| Display | Graphic type LCD (240 dots × 128 dots), supports Japanese, English and Chinese | ||||
| Standard interfaces | RS-232C, USB2.0 (High-Speed), and Ethernet (10BASE-T/100BASE-TX) | ||||
| Command sets | GP-GL and HP-GL™ emulation (set by menu, or selects automatically by received data) | ||||
| Number of tools | Two tools | ||||
| Cutting blade, pen, and tool types | Cutting blade (supersteel), Pens (Water-based fiber-tip pen, oil-based ballpoint pen), and Creasing/scoring tool (*7) | ||||
| Power source | 100 to 240 VAC, 50/60 Hz (Auto switching) | ||||
| Power consumption | Max. 140 VA | ||||
| Operating environment | Temperature: +10 to +35 ºC, Humidity: 35 to 75% RH (non-condensing) | ||||
| Guaranteed accuracy environment | Temperature: +16 to +32 ºC, Humidity: 35% to 70% RH (non-condensing) | ||||
| External dimensions [W x D x H] (Approx.) |
1344 x 1409 x 930 mm (Including stand) |
1934 x 1409 x 930 mm (Including stand) |
2534 x 1409 x 930 mm (Including stand) |
1934 x 1409 x 930 mm (Including stand) |
|
| Weight (Approx.) | 76 kg (Including stand) (*3) | 99 kg (Including stand) (*3) | 116 kg (Including stand) (*3) | 93 kg (Including stand) | |
| Compatible OS (*4) | Windows 11 / 10 / 8.1, Mac OS X 10.7 to 10.11 / macOS 10.12 (Sierra) to 12 (Monterey) | ||||
| Supported software (*4)(*5) | Cutting Master 4 (*6), Graphtec Pro Studio (*6), Graphtec Studio(for Mac) | ||||
| Compatible Standards |
Safety | UL60950-1/cUL, CE marking (Low voltage and EMC) | |||
| EMC | FCC-A, EN55032-A | ||||
- *1
- Available in a limited region. Please contact your local representative of Graphtec.
- *2
- When operated with Graphtec specified media and conditions.
- *3
- Pump (blower) for vacuum suction media hold-down system is not included.
- *4
- For more information about Windows and Macintosh compatibility, please check the website or contact your local representative of Graphtec.
- *5
- The software can be used by downloading from Graphtec website.
- *6
- It requires an Internet connection in order for activation or registration when starting the software for the first time.
- *7
- Recommend to use with Adhesive sheet or Cling mat.
Media type
〇: Available △:Limited
| Type of media | Thickness | Support cutting blade | FCX2000-60VC | FCX2000-120VC | FCX2000-180VC | FCX2000-120ES | FCX4000-50/60ES | |
|---|---|---|---|---|---|---|---|---|
| Self-adhesive marking film (vinyl, fluorescent, reflective) |
up to 0.25 mm | CB09UB-5 | 〇 | 〇 | 〇 | 〇 | 〇 | |
| Heavy paper/board (pattern paper, oil board) |
up to 0.5 mm | CB15U-5, CB15U-K30-5 |
〇 | 〇 | 〇 | 〇 | 〇 | |
| up to 1.0 mm | CB15U-5, CB30UC-1 |
〇 | 〇 | 〇 | 〇 | △(*2) | ||
| Compressed foam sheet | up to 0.8 mm | CB15U-K30-5 | 〇 | 〇 | 〇 | - | 〇 | |
| Sandblast resist rubber | up to 1.0 mm | 〇 | 〇 | 〇 | 〇 | 〇 | ||
| Cardboard | E flute | up to 1.5 mm | CB30UC-1 (*1) | 〇 | 〇 | 〇 | 〇 | - |
| F / G flute | up to 1.2 mm | CB30UC-1 | 〇 | 〇 | 〇 | 〇 | - | |
| CB15U-K30-5 | 〇 | 〇 | 〇 | 〇 | 〇 | |||
| Rubber sheet | up to 1～2 mm | PM-CB-001 (*1) | 〇 | 〇 | 〇 | - | - | |
| Clear sheet for plastic boxes |
up to 0.5 mm | CB15U-5 | 〇 | 〇 | 〇 | 〇 | 〇 | |
| up to 1.0 mm | CB15U-K30-5 | 〇 | 〇 | 〇 | 〇 | 〇 | ||
| High-intensity reflective film | up to 0.5 mm | CB15UA-5 | 〇 | 〇 | 〇 | - | 〇 | |
| up to 1.0 mm | CB15UA-K30-5 | 〇 | 〇 | 〇 | - | 〇 | ||
- (*1)
- Cutting accuracy is not guaranteed. Be sure to try it before using it.
- (*2)
- CB30UC is not available for FCX4000 series.
Standard accessories
* Please read Cutter Blade Manual before use.
| item | Q'ty | Description |
|---|---|---|
| Power cable | 1 | The type of cable is different by destination |
| Cutting blade holder | 1 | PHP35-CB15-HS |
| Cutting blade | 1 | CB15U-2, CB15U-K30-5 |
| Loupe | 1 | PM-CT-001 (for checking the extruded length of blade) |
| Pen holder | 1 | PHP31-FIBER |
| Water-based fiber-tip pen | 1 | KF700-BK (Black) |
| Height adjustment tool | 1 | For adjusting position of tool head (plate, key wrench) |
| Protect sheet | 1 | PM-CR-004A for ES models only |
| USB cable | 1 | Length 2.9 m |
| Roll media stocker | 1 | Loadable media: width up to 950 mm, weight up to 5 kg |
| Stand | 1 | Legs of the stand (Connecting bar is packed with main unit) |
| DVD-ROM | 1 | User's manual (PDF), Cutter blade manual, Windows driver (OPS662), Cutting Master 4 (plug-in software for Illustrator/CorelDRAW in Windows, Illustrator in Mac), Graphtec Pro Studio (design software for Windows), Graphtec STUDIO (Design software for Mac) |
| Printed document | 1 | Quick guide, Usage Precautions, Safety manual |
| Durable flexible hose | 1 | For VC models only, 1.5 to 5 m (shrinked/extended) Connection bore diameter: 50mm |
| Hose band | 2 | For VC models only, to fix the hose |
Options
| Item | Part No. | Description |
|---|---|---|
| Graphtec Pro Studio Plus | OPS682-PLS | Design software including all advanced functions. (1 license) |
| Graphtec Pro Studio Plus for Rhinestone | OPS682-RSF | Limited edition of rhinestone function only. (1 license) |
| Graphtec Pro Studio Plus for Auto Nesting | OPS682-ANF | Limited edition of auto nesting function only. (1 license) |
| Warning Light (Optional) (*1) | OPH-A40 | The component incorporated to FCX2000 |
- (*1)
- For requests of installing a Warning Light on your FCX2000, please contact local representative of us.
Dimensions
Scale : mm
Tolerance : +/- 5 mm
Scale : mm
Tolerance : +/- 5 mm
Scale : mm
Tolerance : +/- 5 mm