LCX1000 series

Specfications

DLP1000 Digital Label Printer Specification

Item Specification
Printinbg method Electrophotographic 4 colors tandem + Intermediate Transfer
Photoconductor OPC drum (+)
Developing method Non-magnetic contact developing
Fusing method Heat roller pressing
Resolution Main scanning direction: 600 dpi
Sub scanning direction: 2400 dpi, 1200 dpi, 600 dpi
First print time 40 sec. or less, when A5 size of one paper (portrait) is printed
Warm-up time Approx. 6mins (including calibrations)
Print speed 124 mm/sec. monochrome or color in 600, 1200 dpi
62 mm/sec. color in 2400 dpi
Substrate type (Label with backing sheet) High Quality Paper, Polyester-based Synthetic Paper,
PET Film White, Glossy Paper, Semi Gloss Paper
Paper size Paper width: 100 mm to 182.4 mm (6 inches + 30 mm)
Paper length: 279.4 mm (11 inches) to 1 roll (Roll paper)
Max. print length per 1 page: 1200 mm (47.24 inches)
  Roll paper Maximum diameter: 10 inches (254 mm)
Paper core inner diameter: 3 inches (76.2 mm)
Printing surface: front face
Paper width: Roll paper
182.4 mm (6 inches + 30 mm)
131.6 mm (4 inches + 30 mm)
178 mm (A5 width + 30 mm)
135 mm (A6 width + 30 mm)
Paper width: Roll paper (Pre-die cut)
182.4 mm (6 inches + 30 mm)
131.6 mm (4 inches + 30 mm)
178 mm (A5 width + 30 mm)
135 mm (A6 width + 30 mm)
Cut paper A5 (148 mm x 210 mm)
A6 (105 mm x 148 mm)
Paper thickness 136 μm to 166 μm (including backing sheet)
Print margin Roll paper;
Leading edge: 3 mm, Trailing edge: 3 mm Left edge: 2 mm, Right edge: 2 mm
Roll paper; (Pre-die cut)
Leading edge: 2 mm, Trailing edge: 2 mm Left edge: 2 mm, Right edge: 2 mm
Cut paper;
Leading edge: 3 mm, Trailing edge: 3 mm Left edge: 2 mm, Right edge: 2 mm
Paper feeding method Roll paper: Supported by the unwinder unit
Cut paper: Supported by the sheet feeder unit (Max. loading capacity 20 sht.)
Paper ejection method Selectable 3-way
Roll to Roll, Roll to Cut, Sheet to Sheet
Roll Paper cut method Cut cross (compatible with auto loading)
Toner supplying method Toner cartridge replacement
Interface USB2.0 (High Speed): PC connection
USB2.0 (High Speed): DLC1000 connection
Network (Ethernet 10BASE-T, 100BASE-TX, 1000BASE-T)
Control panel 7-inch color LCD touch panel display
HDD capacity 500 GB
OS Supported Windouws Vista / 7 / 8 / 8.1 /10 (32/64 bit)
Power supply US: 120 V AC, 60 Hz
EU: 230 V AC, 50 Hz
Maximum power consumption US: 1680 W or less
EU: 1610 W or less
Operational noise • Standby: 59 dB (A) or less
• Operating: 74 dB (A) or less
• Unexpected: 81 dB (A) or less
Usage environment 15 to 32 ºC, 15 to 85 % R.H. (non-condensing)
Condition for guaranteed precision 15 to 27 ºC, 30 to 70 % R.H. (non-condensing)
Externam dimensions (approx.) 1462 (W) x 638 (D) x 758 (H) mm
Weight (approx.) 110 kg
*
The appearance, rating, specifications of the product are subject to change without notice for product improvement, etc.

DLC1000 Digital Label Finishing Cutter Specification

Item Descriptions
Paper feed unit Loadable width Maximum 216 mm
Minimum 100 mm
Page length Maximum 1200 mm (*1)
1-page size: Maximum 300 mm, Minimum 76.2 mm
Loadable roll substrate Maximum 254 mm (10 inches)
Maximum weight 10 kg or less
Paper core inner diameter 76 mm (3-inch paper core)
Laminate Section Loadable width Maximum 196 mm
Minimum 80 mm
Loadable roll media Maximum 200 m, or up to outer diameter 210 mm
Maximum weight 8 kb or less
Paper core inner diameter 76 mm (3-inch paper core)
Windable roll media Maximum outer diameter 200 mm
Paper core inner diameter 25.4 mm (1-inch paper vore)
Paper core length 227 mm
Separator Section Windable roll media (*2) Maximum outer diameter 200 mm, or 200 m roll media paper can be wound up
Paper core inner diameter 25.4 mm (1-inch paper core)
Paper core length 227 mm
Winding Section 1 Loadable width Maximum 216 mm
Minimum 55 mm
Windable roll media (*2) Maximum outer diameter 254 mm, or 200 m roll paper can be wound up
Maximum weight 14 kg or less
Paper core inner diameter 76 mm (3-inch paper core)
Winding Section 2 Loadable width Maximum 108 mm
Minimum 55 mm
Windable roll media (*2) Maximum outer diameter 220 mm, or 200 m roll media paper can be wound up
Maximum weight 7 kg or less
Paper core inner diameter 76 mm (3-inch paper core)
Sliter Section 3 locations
Cross Cut Section Cut Cross Cut
Cutting Section Cutout system Half cut using blade (Supersteel)
Cutter type Supersteel
Drive system Digital servo
Force 0.2 to 2.9 N (20 to 300 gf): 31 steps
Maximum cut area Expand Mode: 203 mm x 1200 mm (Slitter cannot be used.)
Normal Mode: 186 mm x 1200 mm
Maximum cut speed 600 mm/s
Main Unit Specifications Interface USB2.0 (High Speed), Network (Ethernet 10BASE-T/100BASE-TX)
LCD display Graphic Type (128 dots × 64 dots): 21 (characters) x 7
Rated power supply 100 to 120 V AC, 200 to 240 V AC, 50/60 Hz (Automatic changeover)
Power consumption 170 VA or less
Usage environment 10 to 35 ºC, 35 to 70 % R.H. (non-condensing)
Conditions for guaranteed precision 16 to 32 ºC, 35 to 70 % R.H. (non-condensing)
External dimensions (approx.) 1904 (W) × 994 (H) × 1297 (D) mm
Weight (approx.) 151 kg
*1
When setting substrate for long-plotting.
*2
It depends on Graphtec-specified conditions.
*
The external appearance, rating, specifications, etc., of product are subject to change without notice for product improvements, etc.