DATA PLATFORM GL7000

Modules - Max. sampling speed

Module

Channels

in module

Max.

sampling

speed

Storage

device

Available maximum sampling speed (interval

Attached to

1 or 2
modules

Attached to

3 or 4
modules

Attached to

5 to 10
modules


Voltage module
GL7-V
10ch 1kS/s
(1ms)
Built-in RAM 1kS/s (1ms)

Built-in Flash

SD card

SSD (*2)


Voltage / Temp. Module
GL7-M
10ch 100S/s
(10ms)
Built-in RAM 100S/s (10ms)

Built-in Flash

SD card

SSD (*2)


Hi-speed Voltage module
GL7-HSV
4ch 1MS/s
(1μs)
Built-in RAM 1MS/s (1μs)

Built-in Flash

1kS/s (1ms)

SD card

SSD (*2)

1MS/s (1μs) 500kS/s (2μs) 200kS/s (5μs)

High Voltage module
GL7-HV
2ch 1MS/s
(1μs)
Built-in RAM 1MS/s (1μs)

Built-in Flash

1kS/s (1ms)

SD card

SSD (*2)

1MS/s (1μs) 500kS/s (2μs) 200kS/s (5μs)

DC Strain module
GL7-DCB
4ch 100kS/s
(10μs)
Built-in RAM 100kS/s (10μs) (*1)

Built-in Flash

1kS/s (1ms)(*1)

SD card

SSD (*2)

100kS/s (10μs)(*1)

Charge module
GL7-CHA
4ch 100kS/s
(10μs)
Built-in RAM 100kS/s (10μs)

Built-in Flash

1kS/s (1ms)

SD card

SSD (*2)

100kS/s (10μs)

Logic / Pulse module
GL7-L/P
16ch

In Logic mode
1MS/s
(1μs)

Built-in RAM

1MS/s (1μs)(*1)

Built-in Flash

1kS/s (1ms)(*1)

SD card

SSD (*2)

1MS/s (1μs) 500kS/s (2μs) 200kS/s (5μs)(*1)

In Pulse mode

10kS/s
(100μs)

Built-in RAM 10kS/S (100μs) Not available(*1)

Built-in Flash

1kS/s (1ms)

SD card

SSD (*2)

1kS/S (100μs)

Voltage Output module
GL7-DCO
8ch

Sampling

for output

100kS/s
(10μs)

There is no settings of sampling for capturing data in the GL7-DCO because it is the analog voltage output module.

(The data can be captured using other input module even while GL7-DCO module is outputting the analog voltage (*3) signal.)

*1
The number of modules that can be attached is limited by the type of module. (GL7-L/P: up to 7 units using Logic mode, up to 2 units using Pulse mode. GL7-DCB: up to 8 units.)
*2
The SSD module is optional. When the GL7-HSV and GL7-L/P is used simultaneously, number of channel in Pulse mode is limited.
*3
The data captured by the GL7-V, GL7-M, GL7-HSV, GL7-HV, GL7-DCB or GL7-CHA can be replayed on the GL7-DCO module. (The measured data of temperature and humidity can not be replayed. It is able to create and output the simple waveform that are the DC voltage and sine, triangle, ramp, or pulse wave.