midi LOGGER HV GL2000

Specfication & Accessory

Main unit specifications

Item Description
Display (LCD) Size 7-inch TFT color LCD (WVGA: 800 x 480 dots)
Information Waveform in Y-T with digital values, Enlarged waveforms, Digital values and Real-time statistical result values, XY graph
Language English, French, German, Spanish, Russian, Chinese, Korean, Japanese
Interface to PC Type Ethernet (10 BASE-T/100 BASE-TX), USB2.0
Function Data transfer to PC (up to 1 ms sampling), Control command to GL2000
Ethernet functions Web server function, FTP server function, NTP client function, DHCP client function, Email send function
USB function USB mode (File transfer and deletion from built-in flash and SD on GL2000)
Trigger function Trigger action Start or stop capturing data by triggering
Trigger source • Start: Off, Measured signal, Alarm, External, Scheduled time, Scheduled day, Elapsed time
• Stop: Off, Measured signal, Alarm, External, Scheduled time, Scheduled day, Elapsed time
Combination Level OR, Level AND, Edge OR, Edge AND
Threshold • Analog (*1): High or Low in level mode, Rising or Falling in edge mode,
  Window-in, Window-out
• Logic: H or L (4-channel signal pattern)
• Pulse: High or Rising, Low or Falling, Window-in, Window-out
Repeat action Off, On (Re-armed automatically)
Trigger hold out Hold off repeat action in specified period
• Mode: Previous start to next start, previous stop to next start
• Time: zero second (no hold off) to 9999 hrs. 59 min. 59 sec
Defection accuracy ± 0.5 % of measurement range
Pre-trigger Up to the number of capturing data points (max. 4000000)
specified in built-in RAM (only when built-in RAM is used)
Alarm function Alarm action Displays and outputs a signal when alarm is detected
Threshold • Analog input: High, Low, Window-in, Window-out
• Logic input: H or L (signal in each channel)
• Pulse input: High or Rising, Low or Falling, Window-in, Window-out
Combination OR (Source channel can be assigned with OR condition to output port)
Detection cycle Link with analog sampling
Alarm holding On or Off
Detection accuracy ± 0.5 % of measurement range
Storagve deice Built-in RAM Four million samples for each channel
• Memory partition: 4 M samples x 1 bank, 2 M sample x 2 banks,
  1 M samples x 4 banks, 500 k samples x 8 banks
• Capturing data points: Specified 10 to 4000000
• Data type: Captured data
• Auto-save: Transfer captured data to other devices after capturing is completed
  (It can be enabled or disabled)
Built-in Flash 4 GB (for capacity of data: approx. 3.9 GB)
• Data type: Captured data, Condition settings, Screen copy
External USB (*2) Support USB Flash memory device (*3) by USB2.0 Type A port, Single port, No memory capacity limit
• Data type: Captured data, Condition settings, Screen copy
External
SD CARD (*2)
Support SDHC memory card (up to 32 GB) by SD Card slot, Single slot
• Data type: Captured data, Condition settings, Screen copy
Capturing mode Mode Off (Normal), Ring, Relay
Off (Normal) Save data between start to stop
Ring (*4) Save most recent data of specified number
• Destination: Built-in RAM, Built-in Flash, USB or SD
• Number of capturing data: 1000 to 10000000 data (*5)
• Sampling: up to 1 MS/s (interval 1 μs) in built-in RAM,
  up to 1 kS/s (interval 1 ms) with GBD format in other device,
  up to 100 S/s (interval 10 ms) with CSV format in other device
Relay Save data to multiple files with specified capturing time or file size (up to 4 GB) until recording data is stopped
• Destination: Built-in Flash, USB or SD
• Sampling: up to 1 kS/s (interval 1 ms) with GBD format,
  up to 100 S/s (interval 10 ms) with CSV format
Data backup Interval Off, 1, 2, 6, 12, 24 hrs., specific time, or any time with key operation
• Sampling: up to 1 kS/s (interval 1 ms) with GBD format,
  up to 100 S/s (interval 10 ms) with CSV format
File destination Built-in Flash, USB or SD
Hot-swapping
external memory
Hot-swapping USB or SD Flash memory with key operation during data backup
Search function Function Search for specific point in captured data
Search factor • Analog: Signal levels in each channel
• Logic: 4-channel signal pattern
• Pulse: Rising, Falling, Window-in, Window-out in each channel
• Alarm: Alarm occurring point
Calculation function Statistical Real-time: Display digital and statistical values at the same time
• Function: Maximum, Minimum, Peak-to-peak (P-P), Average
Replay: Statistical values between cursors in replay captured data
• Function: Maximum, Minimum, Peak-to-peak (P-P), Average, RMS
Between channels Addition, subtraction, multiplication and division for two analog inputs (only in GBD format)
Scaling (Engineering unit) function Measured value can be converted to the specified engineering unit
• Analog voltage: Converts using four reference points (gain, offset)
• Temperature: Converts using two reference points (offset)
• Pulse count: Converts using two reference points (gain)
Annotation function Comment can be set in each channel, up to 31 alphanumeric
characters and symbols (Display first 8 characters on screen)
Operating environment 0 to 40 ºC when driven by AC adapter or battery, 5 to 85 % RH (non condensed)
Power source AC adapter: 100 to 240 V AC, 50/60 Hz
DC power: 8.5 to 24 V DC (required cable option B-514)
Battery pack: Two battery packs (option B-569) required
Power consumption AC adapter
(in 240 V AC)
Approx. 39 VA (59 VA while charging battery) with disabling screen saver
Approx. 34 VA (55 VA while charging battery) with enabling screen saver
DC drive (24 V) Approx. 0.5 A (0.81 A while charging battery) with disable screen saver
Approx. 0.43 A (0.76 A while charging battery) with enabling screen saver
DC drive (12 V) Approx. 1 A (Cannot charge battery) with disable screen saver
Approx. 0.85 A (Cannot charge battery) with enabling screen saver
DC drive (8.5 V) Approx. 1.46 A (Cannot charge battery) with disable screen saver
Approx. 1.22 A (Cannot charge battery) with enabling screen saver
External dimensions [W×H×D] Approx. 260 x 161 x 83 mm (with the cover)
Weight Approx. 1.7 kg (the cover is attached, AC adapter and battery are not included)
Vibration resistance Compatible with JIS Vibration test method for automobile Type 1 Class A (Vibration durability test: 5 m/s²)
(*1)
It can set for each channel.
(*2)
File size of captured data is up to 4GB in each file.
(*3)
Standard USB memory devices are required.
(*4)
Required minimum capturing time is 15 seconds in GDB format, 30 seconds with CSV format.
(*5)
When using built-in RAM, 10 to 4000000 data

Analog input specifications

Item Description
Number of input channels 4 channels
Type of input terminal Isolated BNC connector and Screw terminal (M3.5 screw) (*6)
Input method All channels isolated unbalanced input, Simultaneous sampling
Sampling speed (interval) 1 M Samples/s to 1 Sample/min (1 μs to 1 min) and External (*7)
• Sampling interval: 1, 2, 5, 10, 20, 50, 100, 200, 500 μs,
  1, 2, 5, 10, 20, 50, 100, 200, 500 ms, 1, 2, 5, 10, 20, 30 sec, 1 min
* When using built-in RAM: 1 μs to 1 min, using other storage: 1 ms to 1 min
Frequency response DC to 200 kHz (within +1/-4 dB)
Measurement
range
Voltage (DC) 20, 50, 100, 200, 500 mV, 1, 2, 5, 10, 20, 50, 100, 200, 500,
1000 V, and 1-5V F.S. * Max. rated safety voltage: ± 600 V DC
DC-RMS
(DC coupling and
rms value meas.)
10, 25, 50, 100, 250, 500 mV rms, 1, 2.5, 5, 10, 25, 50, 100,
250, 500, 1000 V rms F.S. * Max. rated safety voltage: 600 V rms
• Crest Factor: in 1000 V range, up to 1.4 (peak: max. 850 V), in other range, up to 2
• Frequency response: 20 Hz to 10 kHz
• Measures the accumulated value of the DC and AC components in effective value, that is a true-RMS.
Temperature Thermocouple: K, J, E, T, R, S, B, N, W (WRe5-26)
Humidity 0 to 100 % RH - using the humidity sensor (option B-530)
Filter (Low pass) Off, Line (1.5 Hz), 5, 50, 500 Hz, 5, 50 kHz (at -3dB, -6dB/oct)
A/D converter 16-bit (effective resolution: 1/40000 of the measuring full range)
Measurement
accuracy (*8)
Voltage (DC) ± 0.25% of Full Scale
Voltage (RMS) ± 1.5% of Full Scale (Sine wave in 20 Hz - 10 kHz)
Temperature
(Thermocouple)
(*9)
Type Measurement range Measurement accuracy
R/S 0 ≤ TS ≤ 100 ºC
100 < TS ≤ 300 ºC
R: 300 < TS ≤ 1600 ºC
S: 300 < TS ≤ 1760 ºC
± 7.0 ºC
± 5.0 ºC
± (0.05 % of reading + 3.0 ºC)
± (0.05 % of reading + 3.0 ºC)
B 400 ≤ TS ≤ 600 ºC
600 < TS ≤ 1820 ºC
± 5.5 ºC
± (0.05 % of reading + 3.0 ºC)
K -200 ≤ TS ≤ -100 ºC
-100 < TS ≤ 1370 ºC
± (0.05 % of reading + 3.0 ºC)
± (0.05 % of reading + 2.0 ºC)
E -200 ≤ TS ≤ -100 ºC
-100 < TS ≤ 800 ºC
± (0.05 % of reading + 3.0 ºC)
± (0.05 % of reading + 2.0 ºC)
T -200 ≤ TS ≤ -100 ºC
-100 < TS ≤ 400 ºC
± (0.1 % of reading + 2.5 ºC)
± (0.1 % of reading + 1.5 ºC)
J -200 ≤ TS ≤ -100 ºC
-100 < TS ≤ 100 ºC
100 < TS ≤ 1100 ºC
± 3.7 ºC
± 2.7 ºC
± (0.05 % of reading + 2.0 ºC)
N -200 ≤ TS < 0 ºC
0 ≤ TS < 1300 ºC
± (0.1 % of reading + 3.0 ºC)
± (0.1 % of reading + 2.0 ºC)
W 0 ≤ TS ≤ 2315 ºC ± (0.1 % of reading + 2.5 ºC)
Reference Junction Compensation (R.J.C.) accuracy: ± 1.0 ºC
R.J. Compensation Internal or External
Burnout Detecting burnout of Thermocouple with menu operation in free-run mode
Input impedance 1 MΩ ±5%
Signal source impedance up to 1 kΩ
Maximum input
voltage
Between
(+) - (-) terminal
20 mV to 2 V range: 30 V DC/AC,
5 V to 1000 V range: 600 V DC/AC
Between channels
(-) - (-) terminals)
600 V DC/AC (CAT III)
Between
channel - GND
600 V DC/AC (CAT III)
Isolation resistance Min. 50 MΩ (at 500 V DC) with between input and GND
Common-mode rejection ratio Min. 90 dB (50/60 Hz, signal source impedance: max. 300 Ω)
Signal-noise ratio (S/N) 20 mV range: - 40 dB (when input terminals + and - are shorted)
Other range: - 50 dB (when input terminals + and - are shorted)
(*6)
Connections can be made individually to BNC terminal or M3.5 screw terminal.
(*7)
Required Input/Output cable for GL series (B-513) option for connecting signal.
(*8)
Subject to the following conditions:
• Room temperature is 23 ºC ± 5 ºC.
• When 30 minutes or more have elapsed after power has turned on.
• Filter is set to Line (1.5 Hz) in DC measurement and temperature.
• GND terminal is connected to ground.
• It is placed vertically.
• Average of the measured values is used.
(*9)
Wire size of Thermocouple used is 0.32mm diameter in the T and K type, and 0.65mm diameter in other types.

External input & output signal specifications

Item Description
External
input/output
Input (*10, *11) Logic or Pulse (4 channels), Trigger or Sampling (1 channel)
Output (*10, *12) Alarm (4 channels) or Trigger (1 channel) with Alarm (3 channels)
Input signal
specification
Logic and Pulse Voltage range: 0 to +30 V (common ground)
Threshold: Approx. +2.5 V
Hysteresis: Approx. 0.5 V (+2.5 to +3 V)
External trigger
and sampling
Voltage range: 0 to +30 V (common ground)
Threshold: Approx. +1.9 V
Hysteresis: Approx. 0.2 V (+1.9 to +2.1 V)
Logic measurement Measures the status (H or L) of the signal input to each channel
Pulse
measurement
Measurement Counts pulse signals input to each channel
Pulse count
detection cycle
10 μs to 1 hr. (Set separately from analog signal sampling interval)
Maximum
pulse input
Maximum input frequency: 100 kHz,
Maximum count number: 15 M count (24 bit counter)
Measurement
mode
Rotation: Counts the number of pulses per detection cycle and then converts measured value to rotation in rpm
• Span: 0 to 500 M rpm/F.S.
Accumulating: Accumulates the number of pulses count per detection cycle from the start of measurement
• Span: 0 to 20 M count/F.S. (Span is set automatically)
Instant: Counts the number of pulses per detection cycle
• Span: 0 to 20 M count/F.S.
External trigger input (*10) Executes specified trigger action
External sampling input (*10) Executes sampling of measurement signal with each external sampling signal
• Maximum input frequency: 100 kHz (Time error: 1 μs or less)
Output signal Alarm output Open collector (pull-up to 5 V with 10 kΩ resistor)
• Maximum load is the 24 V and 100 mA
Trigger output When a trigger is detected, output terminal releases approximately 500 μs width pulse (Low active)
(*10)
Required Input/Output cable for GL series (B-513) option for connecting signal.
(*11)
Select either Logic input (4 channels) or Pulse input (4 channels), select either external Trigger input or Sampling input.
(*12)
Select either Trigger output (1 channel) or Alarm output (1 channel). Available 3 channels Alarm output always.

Software specifications

Item Description
Model name GL980_2000-APS
Supported OS (*13) Windows10, 8.1, 8, 7 (SP1 or later)
Functions Control GL980 and GL2000, Real-time data capture, Replay data, and Data format conversion
Supported device 1 unit of GL980 or GL2000
Settings control Input condition, Capturing condition, Trigger/Alarm condition, other
Transfer of
captured data
In memory
capturing
with GL2000
Transfer the captured data to a PC sequentially while data is saved in built-in RAM on GL2000
• Sampling interval: 1 μs to 1 min
In real time
capturing
Transfer the captured data to a PC while data is saved in built-in flash memory, SD or USB on GL2000
• Sampling interval: 1 ms to 1 min saved in GBD and CSV format
Displayed information Analog waveform, Logic waveform, Pulse count waveform, Digital value
Display mode Waveform in Y-T with digital values, Enlarged waveforms,
Statistical calculation result values and history, XY graph
File operation Converting data format to CSV from GBD binary with data between cursors or all data
Past data screen function Displays the current data or past part of data by switching.
Available at sampling speed 1 kS/s to 1 S/m (1 ms to 1 min sampling interval)
Statistical calculation Maximum, Minimum, Average and Peak-to-peak (p-p) value during data capturing
(*13)
Graphtec does not support software/driver used with operating systems that have become obsolete and are no longer supported by the OS developer.
In the Windows 7, edition of Ultimate, Enterprise, Professional and Home Premium are supported.

Battery pack B-569 (option) Specifications

Item Description
Capacity 7.2 V, 2900 mAh
Battery operating time Approx. 3 hrs. in displayed signal (LCD: max. brightness)
Approx. 5 hrs. in screen saver mode (no display)
* When two battery packs are installed in GL2000.
Condition: 1 sample per second (1 s), saving captured data to built-in Flash, use two fully charged battery packs, temperature is 25 ºC
Method of charging Charging on GL2000
Charging time Approx 10 hrs. (charging two batteries)
Other functions • If an AC power failure occurs, it will automatically switch from the AC adapter to the battery pack. (AC adapter priority use)
• When the voltage of the battery pack reaches low, the measurement is automatically stopped after saving data file preserving the accumulated data.

Standard accessories

  • AC adapter with power cable
  • Quick start guide and Safety guide
  • CD-ROM (PC application software, User manual)
  • Cover (attached to the main body)
  • Tilt stand set (including mounting screws M4)
  • Screws (M3.5) for input terminal
  • Ferrite core (attach to cable for radiation reduction)

Options and Accessories

Item Model No. Description
Input/Output cable for GL B-513 2 m long (no clip on end of cable)
DC drive cable B-514 2 m long (no clip on end of cable)
Humidity sensor B-530 With 3 m long signal cable (with power plug)
Shunt resistor B-551 250 ohms (Converts signal from “4-20mA” to “1-5V”.)
Battery pack B-569 Rechargeable Lithium-ion battery (7.2 V, 2900mAh)
Bracket for DIN rail B-570 Bracket for DIN rail (GL2000 main body), Build-to-order
Cover B-579 Rubber protector (for replacement)
Carrying case B-581 Comming soon
Input cable, Safe probe - BNC RIC-141A Insulated, 1:1 (42pf), 1.2 m long, 300 V DC, CAT II
Input cable, BNC - BNC RIC-142 Insulated, 1.5 m long, 1000 V DC, CAT II
Input cable, Banana - BNC RIC-143 Insulated, 1.6 m long, 600 V DC, CAT II
Clip, Alligator (small size) RIC-144A For RIC-143, Aperture 11 mm, 300 V DC,
CAT II, Max. 15 A
Clip, Alligator (middle size) RIC-145 For RIC-143/147, Aperture 20 mm, 1000 V DC,
CAT II, Max. 32 A
Clip, Grabber RIC-146 For RIC-143/147, Aperture 5 mm, 1000 V DC,
CAT III, Max. 1 A
Input cable, Banana - BNC (Hi-voltage) RIC-147 Insulated, 1.6 m long, 1000 V DC, CAT II
Input terminal adapter SMA-102 Banana (receptacle) to BNC (plug), Insulated
AC Adapter ACADP-20 Input: 100 - 240 V AC, Output: 24 V DC