Features:

Features

Connection with the GL unit

GLとの接続

The printer can be connected with GL240 or GL840 series wirelessly.
(Optional WLAN module (B-568) is required on GL240 or GL840 series.)
The printer can be connected to the GL980 or GL2000 with USB or LAN cable.

Supports built-in battery

It allows to print data without AC power by driven with built-in rechargeable battery, enables to use anywhere. Lithium-ion battery (6-cell, 11.1 V, 6000 mAh, 66.6 Wh)

  • Driving time: Approx. 150 meters of printing at full charge (continuous printing at 5 mm/s with a low printing rate)
    * When it is used with slower feed speed or longer standby time, the printable length becomes shorter

  • Feeding speed: Up to 5 mm/s when using the battery pack
    * The battery pack or AC adapter is automatically selected, AC adapter has priority. It is not switched while data is being printed.

Wider printing area

最大210mm

It is large type portable printer using 210 mm wide paper, it enables to print waveform with a width of 200mm.

Direct printing with useful functions

It can be connected directly to GL series, and it enables to print data without using PC.

サーマルプリンタの印字サンプル Y-T (waveform) format data printing

Real time measurement with the GL unit
Synchronous or asynchronous with the trigger.
Replaying saved data with the GL unit
All data or data in the area specified by cursors is printed.

Digital format data printing

Real time measurement with the GL unit
Synchronous or asynchronous with the trigger.
(For GL240 and GL840 series only)
Replaying saved data with the GL unit
Prints data in digital data while data is being replayed on the GL unit in Y-T display mode. Option to print data in the area specified by cursors
* Up to 1000 data points.

X-Y graph format data printing

Data is printed in X-Y graph when data is being displayed in the X-Y mode on the GL unit.
(For GL980 and GL2000 only)

Bar graph format printing

Data is printed with accumulated data graph when data is displayed with stacked bar graph on the GL unit.
* It is available using GL240 or GL840 series with GS sensor.

Screen copy

Image of screen displayed on the GL unit is printed.

Supported GL series and communication methods

Model GL240
GL840-M/WV
GL980
GL2000
USB connection - - Yes Yes
LAN cable connection (*4) - Yes (*4) Yes (*4) Yes (*4)
WLAN connection (Required B-568) Yes (*4) Yes (*4) - -
(*4)
- Wireless GL240, GL840 series and LAN cable connection will be available at summer in 2019.
- When using LAN cable connection, WLAN access point is required, and the printer may not be able to satisfy its specifications due to the radio wave condition.

* This printer unit is made by the DASCOM and configured for Graphtec GL series.
* Available regions for this product are limited in order to comply with local wireless communications laws.