フラットベッドカッティングプロッタ FCX2000

Specifications

Specifications

Item FCX4000-50ES FCX4000-60ES
Configuration Digital servo system, Flatbed
Media hold-down method Electrostatic panel
Effective cutting area 660 mm × 488 mm 976 mm × 660 mm
Mountable media
(Y-axis direction)
536 mm 708 mm
Maximum cutting speed 750 mm/s (1 to 75 cm/s in 23 steps)
Cutting pressure Tool 1: Max. 5.88 N (600 gf)
Tool 2: Max. 5.88 N (600 gf)
Cutting force settings Tool 1: in 48 steps, Tool 2: in 48 steps
Minimum character size Approx. 10 mm square (varies with character font and media)
Mechanical resolution 0.005 mm (5µm)
Programmable resolution GP-GL mode: 0.1/0.05/0.025/0.01 mm,
HP-GL™ (*1) : 0.025 mm
Distance accuracy Max.0.2% of the distance moved or 0.1mm, whichever is larger
(excluding contraction of media, in plotting/cutting mode) (*2)
Perpendicularity Max 0.3 mm / 430 mm
(excluding contraction of media, in plotting/cutting mode)
Max 0.4 mm / 610 mm
(excluding contraction of media, in plotting/cutting mode)
Repeatability Max 0.1mm (excluding contraction of media, in plotting/cutting mode) (*2)
Standard interfaces USB2.0 (Full Speed) / RS-232C / Ethernet (10BASE-T/100BASE-TX)
Buffer memory 2MB
Command sets GP-GL / HP-GL™ / AUTO (Automatic switching in GP-GL and HP-GL™)
Number of tools 2 tools
Cutter blade, pen, and tool types Cutter blade: supersteel
Pen: water-based fiber-tip pen
Creasing/scoring tool
Operating panel 3.7-inch graphical LCD (same LCD as the FCX2000)
New features Dual configuration, Creasing in the curve, Perforation cutting (performed by the force control), Data management using the bar-code, Offline cutting operation using the USB memory, Display the degree of wear for the cutting blade, Confirming the cutting object size, Draft mode (higher throughput in arc)
Power supply 100 to 240 V AC, 50/60 Hz (Auto switching)
Power consumption Max. 120 VA
Operating environment Temperature: 10 to 35 degree C ,
Humidity: 35 to 75% RH (non-condensing)
Guaranteed accuracy environment Temperature: 16 to 32 degree C,
Humidity: 35% to 70% RH (non-condensing)
External dimensions (*3)
(W x D x H)
1089 x 897 x 204 mm 1405 x 1069 x 204 mm
(including stand : 1405 x 1097 x 896 mm)
Weight approx. 29kg approx. 38 kg
(including stand : 55 kg)
Compatible OS (*4)(*5) Windows 10 (Home / Pro / Enterprise / Education)
Windows 8.1 (Windows 8.1 / Pro / Enterprise)
Windows 8 (Windows 8 / Pro / Enterprise)
Windows 7 (Ultimate / Enterprise / Professional / Home Premium)
Mac OS X 10.7 to 10.11 / macOS 10.12 (Sierra) to 10.13 (High Sierra)
Supported software Cutting Master 4, Graphtec Pro Studio, Graphtec Studio for Mac, Windows Driver
Compatible
Standards
Safety UL/cUL, CE mark
EMC VCCI Class A, FCC Class A, CE mark (EN55032, others)
(*1)
HP-GL™ is registered trademark of the Hewlett-Packard Corporation of the United States.
(*2)
When operated with Graphtec specified media and conditions.
(*3)
Tolerance: +/- 5 mm
(*4)
Graphtec does not support software/driver used with operating systems that have become obsolete and are no longer supported by the OS developer.
(*5)
For more information about Windows and Macintosh compatibility,
please check the website or contact with your local representative of Graphtec

Media type

Type of media Thickness Support cutting blade FCX4000-50/60ES FCX2000-60VC FCX2000-120VC FCX2000-180VC FCX2000-120ES
Self-adhesive marking film
(vinyl, fluorescent, reflective)
up to 0.25 mm CB09UB
Heavy paper/board
(pattern paper, oil board)
up to 0.5 mm CB15U、
CB15U-K30
up to 1.0 mm CB30UC -
Compressed foam sheet up to 0.8 mm CB15U-K30 -
Sandblast resist rubber up to 1.0 mm CB15U-K20
Cardboard E flute up to 1.5 mm CB30UC (*6) -
F / G flute up to 1.2 mm CB30UC -
CB15U-K30
Rubber sheet up to 1~2 mm PM-CB-001 (*6) - -
Clear sheet for plastic boxes
up to 0.5 mm CB15U
up to 1.0 mm CB15U-K30
High-intensity reflective film up to 0.5 mm CB15UA -
up to 1.0 mm CB15UA-K30 -
(*6)
Cutting accuracy is not guaranteed. Be sure to try it before using it.
(*)
When using a media that can not be securely fixed by the electrostatic adsorption system, please use the optional cling mat PM-CM-001 or PM-CM-002.

Standard Accessory

Item Q'ty Description
Power cord 1 pc. The type of cord is different by destination
Cutting blade holder 1 pc. PHP33-CB15N-HS
Cutting blade 1 pc. CB15U-1 (1 pc/pack)
Loupe 1 pc. PM-CT-001 (for checking the extruded length of blade)
Pen holder 1 pc. PHP31-FIBER
Water-based fiber-tip pen 1 pc. KF700-BK (Black)
Protect sheet 1 pc. PM-CR-002 for FCX4000-50ES / PM-CR-003 for FCX4000-60ES
USB cable 1 pc. Length 2.9 m
DVD-ROM 1 set ・User's manual (PDF)
・Windows driver (OPS662)
・Cutting Master 4 (plug-in software for Illustrator/CorelDRAW in Windows, Illustrator in Mac)
・Graphtec Pro Studio (design software for Windows)
・Graphtec STUDIO (Design software for Mac)
Printed documents 1 set Quick guide, Usage Precautions,Cutter Blade Manual