Features

Enhanced ARMS (Advanced Registration Mark Sensing system) for improved productivity of P&C applications

Equipped the ARMS (Advanced Registration Mark Sensing system)6.0.
Easy and accurate cutting of pre-printed images using the cutting master 4 and etc.
Enables higher productivity of POP, stickers, and prototype cartons.
Show Details >

ARMS Copy function

After cut data is sent from PC, it can be copied multiple times without sending data. In the FCX4000 Series, the first four marks are scanned on the first sheet, and only the first mark in subsequent sheets. This improves productivity by shortening scan detection time.

Matrix copy printing on a sheet

Multiple copies by reloading a sheet

Reverse side Cutting/Creasing using ARMS

Cutting and creasing of printed graphics is possible even on the reverse side of the media. This prevents any scratches or damage to the printed graphic. On the FCX4000 Series, operation is simple using Cutting Master 4 or Graphtec Pro Studio.

Expanded cutting area

This function expands the cutting area to include objects outside of the area enclosed by registration marks. Production efficiency is enhanced by reducing media waste.

Supported by standard crop marks

P&C is performed by printing the industry standard crop marks. Adding special marks with Graphtec software is not necessary. Operation is simple when crop mark information is entered within Cutting Master 4 software.

Reversed color registration mark

Marks are detectable when there is reasonable contrast against the background. For example, a white mark on a colored background.
When the reversed style mark is used, it is able to detect even on the media such as the type of glossy or shiny.