CE6000Plus

Specifications

Specifications

Item CE LITE-50
Maximum cutting area (W x L) (*1) 498 mm x 3 m
Cutting area of guaranteed accuracy (W x L) (*1) 478 mm x 1 m
Mountable media width (*2) Max. 508 mm　Min. 210 mm (A4 portrait orientation)
Mountable roll media type diameter 2 inch paper tube: Maximum diameter 150 mm, Minimum diameter: 52.8 mm
3 inch paper tube: Maximum diameter 150 mm, Minimum diameter: 78.2 mm
weight Max. 2.5 kg
Maximum cutting speed 500 mm/s in all direction
Maximum cutting force 2.1 N (210 gf)
Blade type Supersteel
Pen type Fiber-tip or ballpoint pen available in market(*3)
Media type up to 0.1 mm thick self-adhesive film (vinyl / fluorescent / reflective)
* high-intensity reflective film is excluded
Programmable resolution GP-GL : 0.1 / 0.05 / 0.025 / 0.01 mm
HP-GL™ : 0.025mm
Interface USB2.0
Storage device (external input) USB flash memory (*7)
Power source 100-240 V AC, adapter output 24 V DC (2A)
Power consumption 32 W
Operating environment 10 to 35 ºC, 35 to 75 % R.H. (non-condensing)
Guaranteed accuracy environment 16 to 32 ºC, 35 to 70 % R.H. (non-condensing)
External dimensions (W x D x H) Approx. 784 x 227 x 164 mm (without roll media stocker)
Weight Approx. 8.0 kg (without roll media stocker)
Compatible OS (*4) Windows 10 / 8.1 / 8 / 7
Mac OS X 10.6 to 10.11 / macOS 10.12 (Sierra) to 10.14 (Mojave)
(Graphtec Studio: 10.6 - 10.14, Cutting Master 4: 10.7 - 10.14)
Supported software / driver (*5) Cutting Master 4 (*6), Graphtec Pro Studio (*6), Graphtec Studio (for Mac), Windows driver
Compatibility Standards Safety UL/cUL, CE mark
EMC VCCI Class A, FCC Class A, CE mark (EN55032, others)
(*1)
When operated with Graphtec specified media and conditions. (the roll media stocker is used for long media)
(*2)
For non-standardized sizes, use the carrier sheet.
(*3)
It requires the pen adapter for CE LITE-50 ( Optional ).
The diameter range of available water based felt-tipped pen ：8 mm to 11.3 mm.
There are 3 types of pen adapter to match the width of water based felt-tipped pen.
*There are cases where the pen is not available depends on the shape.
(*4)
Graphtec does not support software/driver used with operating systems that have become obsolete and are no longer supported by the OS developer.
(*5)
Please check "Support" page or contact your local representative of Graphtec.
(*6)
It requires an Internet connection in order for activation or registration when starting the software for the first time.
(*7)
The USB flash memory format only supports FAT32. Please note that NTFS and exFAT are not supported.

Standard accessories

Item QTY Description
AC adapter 1 Cord type varies by country
Cutter Set (Standard Blade) 1 Standard type (PM-BS-001)
Carrier Sheet (13-inch) 1 330 mm wide (13 inches : PM-CM-003)
Cross cutter 1 For manually cutting from sheets and rolls (PM-CC-001)
Roll media stocker 1  
Blade tip cap tool 1 For removing the edge of a blade
USB cable 1 1.5 m long
Setup manual 1 Written in 10 languages
Safety manual 1 Written in 10 languages
(*)
Please download the user manual of CE LITE-50 from "Support" page.

Options

Item Part No. Description Package
Graphtec Pro Studio Plus OPS682-PLS Design software including all advanced functions.
(1 license)		 1 set/pack
Graphtec Pro Studio Plus for Rhinestone OPS682-RSF Limited edition of rhinestone function only. (1 license) 1 set/pack
Graphtec Pro Studio Plus for Auto Nesting OPS682-ANF Limited edition of auto nesting function only. (1 license) 1 set/pack