Blade & Tools

Blade type and typical application

We offer several high-quality blade for each material so that it can be used in a variety of applications.
(*) : Attached as standard accessory(the quantity attached is different)

Item Specification Suitable media type Compatible models
(x : Available)
CE6000 PLUS FC8600 FCX4000 / FC4500 FCX2000
CB09UA-5

* Spring attached.
[Spring] Yes
[Material] Super Steel
[Diameter] φ0.9mm
[Angle] 45°
Self-adhesive marking film (vinyl, fluorescent, reflective), Paper, Heat transfer media
[Thickness] up to 0.25mm
x x x x
CB09UB
[Spring] No
[Material] Super Steel
[Diameter] φ0.9mm
[Angle] 45°
Self-adhesive marking film (vinyl, fluorescent, reflective), Paper, Heat transfer media
[Thickness] up to 0.25mm
x (*) x (*) x x
CB09-E
[Spring] No
[Material] Super Steel
[Diameter] φ0.9mm
[Angle] 45°
Self-adhesive marking film (vinyl, fluorescent, reflective), Paper, Heat transfer media
[Thickness] up to 0.25mm
x x x x
CB09UA-K60-5

* Spring attached.
[Spring] Yes
[Material] Super Steel
[Diameter] φ0.9mm
[Angle] 60°
Special blade for cutting the window tint film or thin film
[Thickness] up to 0.25mm
x x N/A N/A
CB09UB-K60-5
[Spring] No
[Material] Super Steel
[Diameter] φ0.9mm
[Angle] 60°
Special blade for cutting the window tint film or thin film
[Thickness] up to 0.25mm
x x N/A N/A
CB15U-5SP

* Spring attached.
[Spring] Yes
[Material] Super Steel
[Diameter] φ1.5mm
[Angle] 45°
Heavy paper/board
[Thickness] up to 0.5mm
x x x x
Heavy paper/board (pattern paper, oil board)
[Thickness] up to 0.5mm
N/A N/A
CB15U-5
[Spring] No
[Material] Super Steel
[Diameter] φ1.5mm
[Angle] 45°
Heavy paper/board
[Thickness] up to 0.5mm
x x x (*) x (*)
Heavy paper/board (pattern paper, oil board)
[Thickness] up to 0.5mm
N/A N/A
CB15U-K30-5SP

* Spring attached.
[Spring] Yes
[Material] Super Steel
[Diameter] φ1.5mm
[Angle] 30°
Heavy paper/board 
Corrugated board (F,G flute)
Foam sheet, Magnet sheet, Rubber sheet for Sandblast
[Thickness] up to 1.1mm
N/A N/A x x
For cutting small detailed characters(less than 10mm)
Self-adhesive marking film (vinyl, fluorescent, reflective)
[Thickness] up to 0.25mm
x x
CB15U-K30-5
[Spring] No
[Material] Super Steel
[Diameter] φ1.5mm
[Angle] 30°
Heavy paper/board 
Corrugated board (F,G flute)
Foam sheet, Magnet sheet, Rubber sheet for Sandblast
[Thickness] up to 1.1mm
N/A N/A x x (*)
For cutting small detailed characters(less than 10mm)
Self-adhesive marking film (vinyl, fluorescent, reflective)
[Thickness] up to 0.25mm
x x
CB15U-K20
[Spring] Yes
[Material] Super Steel
[Diameter] φ1.5mm
[Angle] 20°
Rubber sheet for Sandblast
[Thickness] up to 1.0mm
N/A N/A x x
CB15UA-5
[Spring] No
[Material] Super Steel
[Diameter] φ1.5mm
[Angle] 45°
High intensity reflective film
[Thickness] up to 0.5mm
N/A x x x
CB15UA-K30-5
[Spring] No
[Material] Super Steel
[Diameter] φ1.5mm
[Angle] 30°
High intensity reflective film
[Thickness] up to 1.0mm
N/A x x x
CB30UC-1
[Spring] Yes
[Material] Super Steel
[Diameter] φ3.0mm
[Angle] 45°
Corrugated board (E,F,G flute)
[Thickness] up to 1.5mm
* Cutting accuracy is not guaranteed. Be sure to try it before using it.
N/A N/A N/A x
PM-CB-001
[Spring] Yes
[Material] Super Steel
[Diameter] φ3.0mm
[Angle] 30°
General purpose rubber sheet (Durometer:60 to 65)
[Thickness] 1.0 ~ 2.0mm
* Cutting accuracy is not guaranteed. Be sure to try it before using it.
N/A N/A N/A x

Blade and the corresponding holder List

Blade corresponding holder (x : Available)
Diameter Item PHP33-CB09N-HS
Spring built-in type

PHP35-CB09-HS
Spring built-in type
PHP33-CB15N-HS
Spring built-in type
PHP35-CB15-HS
Spring built-in type
PM-CH-001
0.9mm CB09UA-5
CB09UB-5
CB09-E

x x      
CB09UA-K60-5
CB09UB-K60-5
x x      
1.5mm (*1) CB15U-5SP
CB15U-5
    x x  
CB15U-K30-5SP
CB15U-K30-5
    x x  
CB15U-K20-2SP

    x x  
CB15UA-5
    x x  
CB15UA-K30
    x x  
3.0mm (*2) CB30UC-1
        x
PM-CB-001
        x

*1:It is required to remove the spring.
*2:Cutting accuracy is not guaranteed. Be sure to try it before using it.

Recommended Settings for small detailed character cutting

Model Setting on Control Panel / GRAPHTEC STUDIO / Cutting Master 3
TOOL OFFSET FORCE SPEED ACCELERATION
CE6000 PLUS (*3) OTHER (*4) +31 10 - 14 30 or less 2
FC8600 CB15U-K30 +2 10 - 14 30 or less 4
FC4500 15UK30 +2 10 - 14 30 or less 3
FCX2000 / FCX4000 CB15U-K30 0 10 - 14 30 or less 3

*3:The CE6000-40-PLUS/60-PLUS/120-PLUS only.
*4:In the CE6000 PLUS, CB15U-K30 can not be selected as the TOOL type. Please select [OTHER] instead, and set the each value indicated as above.

 

Regarding the Consumable Items for Cutting Plotters

In recent years, malicious knockoff products of our consumable items are sold in the market.
The corporate logo and even the model name printed on the package are replicated, so that there are many cases where customers purchase them and have problems.

 

Unfortunately, we cannot guarantee even if the malfunction occurs by using the knockoff products purchased accidentally.
Please be careful when purchasing the consumable items.

 

As with knockoff products, problems with using third-party cutting blades or cutting blade holders are increasing. We cannot guarantee the problems when third-party products are used, so please use them at your own risk.

 

Reference: Genuine cutting blade (CB09UB-5)

Note: For other cutting blades, Type, Quantity, JAN, Lot number vary.

 

Thank you for your understanding.